it would be reacquired dynamical IP address and type the below command to see the network information. (it would be for a while to configure it) ipmitool -I lanplus -H 192.168.0.100 -U admin -P admin lan set 1 ipsrc dhcp Type the below command to configure DHCP Mode. Type the below command to change MAC address on your host machine ipmitool -I lanplus -H 192.168.0.100 -U admin -P admin raw 0x0c 0x01 0x01 0xc2 0x00 Note: the Default network configuration is static mode with 192.168.0.100 ipmitool -I lanplus -H 192.168.0.100 -U admin -P admin -b 0 -t 0x82 mc info Open cmd.exe (Windows Environment ) or terminal ( Linux Environment) on your host machine and execute the command to see the MMC FW is alive: Type the Ping command to see if the connection is alive between your host machine and the AVA ping 192.168.0.100 Configure the static IP Address on the network device and save it:.In your host Machine with Windows Environment: Type the below command to configure the static IP address sudo ifconfig eth0 192.168.0.22 netmask 255.255.255.0 In your host Machine with Linux Environment: Ubuntu: Type the below commands to install sudo apt updateĬonfirm the connection is alive between your host machine and AVA system Prepare the Ethernet cable and connect to your host machine and AVA system like this:ĭownload & Install IPMI Management Utility on your host machine Using IPMI Network to change MAC/IP Address Before you begin, Note: Default network configuration on BMC is static mode with 192.168.0.100 (IP address)/00:00:00:00:00(MAC address) This procedures will walk you through how to do that. There are several approaches to access BMC to change MAC/IP Address.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |